How to Clean & Remove Permanent Marker From Marble

Marble’s attractive color variations make it a natural selection for uses around the home, like tabletops, counters and even flooring. This absorbent material is subject to stains, nevertheless. Ink from a permanent mark may soak in the marble a bit, making a clear mark, particularly on a light-colored marble. Removing the stain can typically be accomplished without professional assistance, but it might take several attempts to get rid of every trace of the ink.

Pour rubbing alcohol above the stain — sufficient to fully cover and soak the mark ink. Permit the alcohol to soak in the marble for several minutes.

Rub the stained area with a nylon scrub pad. Blot up excess liquid after scrubbing with a paper towel. Alcohol is most successful on permanent mark if the stain is relatively fresh. If the stain remains intact, continue to Step 3.

Pour a small amount of distilled water over the stain to saturate the area, which can help lift away the ink.

Pour a couple of tablespoons of baking soda or talc to a shallow bowl. An specific measurement doesn’t matter; utilize as much as you want to pay for all the mark stains at least 1/4-inch thick. Add just a little hydrogen peroxide, stirring and adding more until the mix has a paste-like consistency that doesn’t operate. This combination forms a poultice that pulls the stain out of the marble and to the peroxide mix instead. If the stain is on a dark marble, then use acetone rather than peroxide.

Scoop the poultice paste out above the stain or stains, spreading it to a 1/4-inch thick layer.

Smooth a bit of plastic wrap over the paste, securing it with bits of masking tape. Allow to harden in position for at 24 to 48 hours.

Remove the plastic wrap and tape. Wipe the paste away with a damp sponge. Rinse with distilled water. Buff the area dry with a soft white cloth — white assures no seams will transfer from the cloth into the marble.

Repeat Steps 4 through 7 if any ink remains.

See related